$ DeviceNetTM Electronic Data Sheet; Banner Engineering Corp., 130_2_2.eds

[File]

   DescText    = "MICRO-SCREEN Safety Light Screen EDS File";
   CreateDate  = 01-07-1999;
   CreateTime  = 10:55:00;
   ModDate      = 02-24-2003;
   ModTime      = 09:00:00;
   Revision    = 1.4;            $ EDS File Revision

[Device]
   VendCode    = 12;
   VendName    = "Banner Engineering Corp.";
   ProdType    = 130;
   ProdTypeStr = "Safety Light Screen";
   ProdCode    = 2;
   MajRev      = 2;              $ Device Major Revision
   MinRev      = 1;              $ Device Minor Revision
   ProdName    = "MICRO-SCREEN 2";
   Catalog     = "USDINT-2T2D/USDINT-2T4D";

[IO_Info]

   Default = 0X0001;             $ The default I/O type is Poll
                                 $ Bit 0: Poll
                                 $ Bit 2: Change of State

   PollInfo = 0X0005,            $ OK to use COS with Poll
         1,                      $ Default Producing Connection: Input1
         0;                      $ Default Consuming Connection: Output1


   COSInfo = 0X0005,             $ OK to use Poll with COS
         2,                      $ Default Producing Connection: Input2
         0;                      $ Default Consuming Connection: Output2

$ -- Input Connections --

   Input1 =                      $ This input is for produced POLL data
         8,                      $ Size of Poll Response in bytes
         0,                      $ All bits significant
         0x0001,                 $ Only use for Poll
         "Poll Response Data",   $ Name
         6,                      $ Path size
         "20 04 24 01 30 03",    $ Path is Class 04, Instance 01, Attribute 03
         $ Data consists of (in order) Params: 1,3-6,2,8,9,7,23,32,35,36,31,10,16,24
         $
         $  Byte# Bit7  Bit6  Bit5  Bit4  Bit3  Bit2  Bit1  Bit0
         $
         $    0   --------------------Param1--------------------
         $    1   --Param3--  --Param4--  --Param5--  --Param6--
         $    2               --Param2--  --Param8--  --Param9--
         $    3               --Param7--        -----Param23----
         $    4   --Param32   --Param35-  --Param36- --Param31--
         $    5   --------------------Param10-------------------
         $    6   --------------------Param16-------------------
         $    7   --------------------Param24-------------------
         $
         $
         "Safety Light Screen Poll Data";            $ Help String


   Input2 =                      $ This input is for produced COS data
         1,                      $ Size of COS Message in bytes
         0,                      $ All bits significant
         0x0004,                 $ Only use for COS
         "COS Data",             $ Name of Connection
         6,                      $ Path size
         "20 04 24 02 30 03",    $ Path is Class 04, Instance 02, Attribute 03
         $ Data consists of (in order) Param2, Param1
         $  Byte# Bit7  Bit6  Bit5  Bit4  Bit3  Bit2  Bit1  Bit0
         $
         $    0   --Param2--  --------------Param1--------------
         "Safety Light Screen COS Data";            $ Help String

$ -- Output Connections --


$ -- Parameters --

[ParamClass]
   MaxInst=36;                   $ Number of Parameters
   Descriptor=0x01;              $ Bit 0: Individual Parameter
                                 $ Instances supported
   CfgAssembly=0;                $ There is no instance of a
                                 $ configuration assembly

[Params]

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param1 = $ Operating Mode
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 01",       $ Class A0 Instance 1 Attribute 1
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Operating Mode",          $ Name
      "",                        $ Units (Not Used)
   "Overall status of the light screen system. See manual Sec. 2", $ Help string
      0,16,0,                    $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param2 = $ Defined Area
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 02",       $ Class A0 Instance 1 Attribute 2
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Defined Area",            $ Name
      "",                        $ Units (Not Used)
 "Status of the light screen sensing area. See manual Sec. 1 & 2", $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param3 = $ FSD1 Relay
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 03",       $ Class A0 Instance 1 Attribute 3
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "FSD1 Relay",              $ Name
      "",                        $ Units (Not Used)
      "Status of the FSD1 output relay. See manual Sec. 2", $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param4 = $ FSD2 Relay
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 04",       $ Class A0 Instance 1 Attribute 4
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "FSD2 Relay",              $ Name
      "",                        $ Units (Not Used)
      "Status of the FSD2 output relay. See manual Sec. 2", $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param5 = $ SSD Relay
      0,          $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 05",       $ Class A0 Instance 1 Attribute 5
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "SSD Relay",               $ Name
      "",                        $ Units (Not Used)
      "Status of the SSD output relay. See manual Sec. 2",  $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param6 = $ Aux Mon Relay
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 06",       $ Class A0 Instance 1 Attribute 6
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "AUX Mon Relay",           $ Name
      "",                        $ Units (Not Used)
      "Status of the Aux Mon output relay. See manual Sec. 2", $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param7 = $ Key Input
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 07",       $ Class A0 Instance 1 Attribute 7
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Key Input",               $ Name
      "",                        $ Units (Not Used)
      "Status of the Key Input. See manual Sec. 2 & 4",  $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param8 = $ Test Input
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0A",       $ Class A0 Instance 1 Attribute 10
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Test Input",              $ Name
      "",                        $ Units (Not Used)
      "Status of the Test Input. See manual Sec. 2",  $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param9 = $ Noise Detected
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0B",       $ Class A0 Instance 1 Attribute 11
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Noise Detected",          $ Name
      "",                        $ Units (Not Used)
      "Status of electrical & optical Noise. See manual Sec. 5",  $ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param10 = $ Sensor Beams
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0D",       $ Class A0 Instance 1 Attribute 13
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Sensor Beams",            $ Name
      "",                        $ Units (Not Used)
      "The number of beams in the emitter and receiver.",   $ Help string
      0,255,255,                 $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param11 = $ Error Code
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0E",       $ Class A0 Instance 1 Attribute 14
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Error Code",              $ Name
      "",                        $ Units (Not Used)
      "System diagnostic lockout error code. See manual Sec. 5",  $ Help string
      0,15,15,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param12 = $ Description
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0E",       $ Class A0 Instance 1 Attribute 14
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Description",             $ Name
      "",                        $ Units (Not Used)
      "Description of the current error code. See manual Sec.5",  $ Help string
      0,15,15,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param13 = $ Action 1
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0E",       $ Class A0 Instance 1 Attribute 14
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Action 1",                $ Name
      "",                        $ Units (Not Used)
      "Description of the 1st Action to resolve the current error code.",  $ Help string
      0,15,15,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param14 = $ Action 2
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0E",       $ Class A0 Instance 1 Attribute 14
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Action 2",                $ Name
      "",                        $ Units (Not Used)
      "Description of the 2nd Action to resolve the current error code.",  $ Help string
      0,15,15,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param15 = $ Action 3
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0E",       $ Class A0 Instance 1 Attribute 14
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Action 3",                $ Name
      "",                        $ Units (Not Used)
      "Description of the 3rd Action to resolve the current error code.",  $ Help string
      0,15,15,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param16 = $ # Blocked Beams
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 1E",       $ Class A0 Instance 1 Attribute 30
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "# Blocked Beams",         $ Name
      "",                        $ Units (Not Used)
      "Number of sensor beams currently blocked.", $ Help string
      0,255,255,                 $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param17 = $ Beams 1-16
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 1F",       $ Class A0 Instance 1 Attribute 31
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 1-16",              $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 1-16. 0=Blocked or not used, 1=Clear",  $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param18 = $ Beams 17-32
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 20",       $ Class A0 Instance 1 Attribute 32
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 17-32",             $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 17-32. 0=Blocked or not used, 1=Clear", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param19 = $ Beams 33-48
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 21",       $ Class A0 Instance 1 Attribute 33
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 33-48",             $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 33-48. 0=Blocked or not used, 1=Clear", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param20 = $ Beams 49-64
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 22",       $ Class A0 Instance 1 Attribute 34
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 49-64",             $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 49-64. 0=Blocked or not used, 1=Clear", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param21 = $ Beams 65-80
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 23",       $ Class A0 Instance 1 Attribute 35
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 65-80",             $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 65-80. 0=Blocked or not used, 1=Clear", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param22 = $ Beams 81-96
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 24",       $ Class A0 Instance 1 Attribute 36
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Beams 81-96",             $ Name
      "",                        $ Units (Not Used)
      "Status of Beams 81-96. 0=Blocked or not used, 1=Clear", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param23 = $ E-Stop Input
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 13",       $ Class A0 Instance 1 Attribute 19
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "E-Stop Input",            $ Name
      "",                        $ Units (Not Used)
      "Status of E-Stop Input. See manual Sec. 4", $ Help string
      0,4,4,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param24 = $ # Fixed Beams
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 28",       $ Class A0 Instance 1 Attribute 40
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "# Fixed Beams",           $ Name
      "",                        $ Units (Not Used)
 "Number of sensor beams currently programmed for Fixed Blanking.",$ Help string
      0,255,255,                 $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param25 = $ Fixed Beam 1-16
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 29",       $ Class A0 Instance 1 Attribute 41
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 1-16",         $ Name
      "",                        $ Units (Not Used)
      "Location of Fixed Beams 1-16. 0=Active or not used, 1=Blanked",  $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param26 = $ Fixed Beam 17-32
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2A",       $ Class A0 Instance 1 Attribute 42
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 17-32",        $ Name
      "",                        $ Units (Not Used)
      "Location of Fixed Beams 17-32. 0=Active or not used, 1=Blanked", $ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param27 = $ Fixed Beam 33-48
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2B",       $ Class A0 Instance 1 Attribute 43
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 33-48",        $ Name
      "",                        $ Units (Not Used)
  "Location of Fixed Beams 33-48. 0=Active or not used, 1=Blanked",$ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param28 = $ Fixed Beam 49-64
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2C",       $ Class A0 Instance 1 Attribute 44
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 49-64",        $ Name
      "",                        $ Units (Not Used)
  "Location of Fixed Beams 49-64. 0=Active or not used, 1=Blanked",$ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param29 = $ Fixed Beam 65-80
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2D",       $ Class A0 Instance 1 Attribute 45
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 65-80",        $ Name
      "",                        $ Units (Not Used)
  "Location of Fixed Beams 65-80. 0=Active or not used, 1=Blanked",$ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param30 = $ Fixed Beam 81-96
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2E",       $ Class A0 Instance 1 Attribute 46
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xD2,                      $ Data Type: 0xD2 = WORD
      2,                         $ Size: 2 byte
      "Fixed Beam 81-96",        $ Name
      "",                        $ Units (Not Used)
  "Location of Fixed Beams 81-96. 0=Active or not used, 1=Blanked",$ Help string
      0,0xFFFF,0,                $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param31 = $ Auto Power-up
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 15",       $ Class A0 Instance 1 Attribute 21
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Auto Power-up",           $ Name
      "",                        $ Units (Not Used)
   "Status of Auto Power-up selection switches. See manual Sec. 3",$ Help string
      0,2,2,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param32 = $ Floating Blanking
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 14",       $ Class A0 Instance 1 Attribute 20
      0x0032,                    $ Descriptor:Monitor, Read-Only, Enum. Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Floating Blanking",       $ Name
      "",                        $ Units (Not Used)
"Status of Floating Blanking selection switches. See manual Sec. 3",$Help string
      0,4,4,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param33 = $ A
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 0F",       $ Class A0 Instance 1 Attribute 15
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "A",                       $ Name
      "",                        $ Units (Not Used)
      "Detail error code A. (For Banner personnel)",  $ Help string
      0,255,0,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param34 = $ B
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 10",       $ Class A0 Instance 1 Attribute 16
      0x0030,                    $ Descriptor:Monitor, Read-Only.
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "B",                       $ Name
      "",                        $ Units (Not Used)
      "Detail error code B. (For Banner personnel)",  $ Help string
      0,255,0,                   $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param35 = $ Autobaud
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 03 24 01 30 64",       $ Class 3 Instance 1 Attribute 100
      0x0002,                    $ Descriptor: Enumerated Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "Autobaud",                $ Name
      "",                        $ Units (Not Used)
      "Status of the current Autobaud setting.  See manual Sec. X",  $ Help string
      0,1,1,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Param36 = $ COS Trigger
      0,                         $ Parameter Value
      6,                         $ Path size
      "20 A0 24 01 30 2F",       $ Class A0 Instance 1 Attribute 47
      0x0002,                    $ Descriptor: Enumerated Strings
      0xC6,                      $ Data Type: 0xC6 = USINT
      1,                         $ Size: 1 byte
      "COS Trigger",             $ Name
      "",                        $ Units (Not Used)
      "Status of the current COS Trigger setting.  See manual Sec. X",  $ Help string
      0,1,0,                     $ min value, max value, default value
      1,1,1,0,                   $ Multiply, divide, base, offset scaling (Not Used)
      0,0,0,0,                   $ Multiply, divide, base, offset links (Not Used)
      0;                         $ Decimal Places

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

 [EnumPar]

Param1 = $ Operating Mode
   "----------------",     $ 0
   "Off",                  $ 1
   "Power Up",             $ 2
   "????????????????",     $ 3
   "Run",                  $ 4
   "????????????????",     $ 5
   "????????????????",     $ 6
   "????????????????",     $ 7
   "Lockout",              $ 8
   "????????????????",     $ 9
   "????????????????",     $ 10
   "????????????????",     $ 11
   "????????????????",     $ 12
   "????????????????",     $ 13
   "????????????????",     $ 14
   "????????????????",     $ 15
   "Program";              $ 16


Param2 = $ Defined Area
   "Clear",                $ 0
   "Blocked",              $ 1
   "----------------";     $ 2

Param3 = $ FSD1 Relay
   "De-Energized",         $ 0
   "Energized",            $ 1
   "----------------";     $ 2

Param4 = $ FSD2 Relay
   "De-Energized",         $ 0
   "Energized",            $ 1
   "----------------";     $ 2

Param5 = $ SSD Relay
   "De-Energized",         $ 0
   "Energized",            $ 1
   "----------------";     $ 2

Param6 = $ Aux Mon Relay
   "De-Energized",         $ 0
   "Energized",            $ 1
   "----------------";     $ 2

Param7 = $ Key Input
   "Open (Run)",           $ 0
   "Closed (Reset)",       $ 1
   "----------------";     $ 2

Param8 = $ Test Input
   "Open (Normal)",        $ 0
   "Closed (Test)",        $ 1
   "----------------";     $ 2

Param9 = $ Noise Detected
   "No",                   $ 0
   "Yes",                  $ 1
   "----------------";     $ 2

Param11 = $ Error Code
   "0",                    $ 0
   "1",                    $ 1
   "2",                    $ 2
   "3",                    $ 3
   "4",                    $ 4
   "5",                    $ 5
   "6",                    $ 6
   "7",                    $ 7
   "8",                    $ 8
   "9",                    $ 9
   "10",                   $ 10
   "11",                   $ 11
   "12",                   $ 12
   "** undefined code **", $ 13
   "** undefined code **", $ 14
   "----------------";     $ 15

Param12 = $ Description
   "E-Stop Open",          $ 0
   "Relay Error",          $ 1
   "Key Input Error",      $ 2
   "Controller Error",     $ 3
   "Receiver Error",       $ 4
   "Emitter Error",        $ 5
   "Sensor Com Error",     $ 6
   "DIP Switch Error",     $ 7
   "CPU Error",            $ 8
   "E-Stop Error",         $ 9
   "System Error",         $ 10
   "Power Up Error",       $ 11
   "Program Error",        $ 12
   "** undefined code **", $ 13
   "** undefined code **", $ 14
   "----------------";     $ 15

Param13 = $ Action 1
   "Check E-Stop",         $ 0
   "New Relay Board",      $ 1
   "Key Position OK?",     $ 2
   "New Controller",       $ 3
   "Check Cable",          $ 4
   "Check Cable",          $ 5
   "Check Cables",         $ 6
   "Check Settings",       $ 7
   "New Controller",       $ 8
   "Check Circuit",        $ 9
   "Fixed Beams OK?",      $ 10
   "Prog Switch On?",      $ 11
   "Too Much Time",        $ 12
   "** undefined code **", $ 13
   "** undefined code **", $ 14
   "----------------";     $ 15

Param14 = $ Action 2
   "New Controller",       $ 0
   "New Controller",       $ 1
   "Invalid Reset",        $ 2
   "",                     $ 3
   "New Receiver",         $ 4
   "New Emitter",          $ 5
   "Check for Noise",      $ 6
   "New Controller",       $ 7
   "",                     $ 8
   "New Controller",       $ 9
   "",                     $ 10
   "",                     $ 11
   "Invalid Settings",     $ 12
   "** undefined code **", $ 13
   "** undefined code **", $ 14
   "----------------";     $ 15

Param15 = $ Action 3
   "New Relay Board",      $ 0
   "",                     $ 1
   "New Key Switch",       $ 2
   "",                     $ 3
   "",                     $ 4
   "",                     $ 5
   "New Sensor/s",         $ 6
   "",                     $ 7
   "",                     $ 8
   "New Relay Board",      $ 9
   "",                     $ 10
   "",                     $ 11
   "See Manual",           $ 12
   "** undefined code **", $ 13
   "** undefined code **", $ 14
   "----------------";     $ 15

Param23 = $ E-Stop Input
   "Open (Stop)",          $ 0
   "ab Open cd Short",     $ 1
   "ab Short cd Open",     $ 2
   "Closed (Go)",          $ 3
   "----------------";     $ 4

Param31 = $ Auto Power Up
   "Off",                  $ 0
   "On",                   $ 1
   "----------------";     $ 2

Param32 = $ Floating Blanking
   "Off",                  $ 0
   "1 Beam",               $ 1
   "2 Beam",               $ 2
   "Invalid Settings",     $ 3
   "----------------";     $ 4

Param35 = $ Autobaud
   "Off",                  $ 0
   "On";                   $ 1

Param36 = $ COS Trigger
   "Operating Mode",       $ 0
   "Op Mode/Def Area";     $ 1


 [Groups]
Group1 = "System Status",10,1,2,3,4,5,6,7,8,23,9;
Group2 = "Alignment",10,1,2,10,16,17,18,19,20,21,22;
Group3 = "System Settings",12,10,31,32,24,25,26,27,28,29,30,35,36;
Group4 = "Diagnostic Info",8,1,11,12,13,14,15,33,34;